The double column tie is the perfect choice for tying up your partner’s lower body. This will give a restrictive sensation similar to handcuffs, and the extra wraps give it just the right amount of support.
Begin by holding rope from the bight and wrap twice around the ankles, and make sure to do this above the ankle bone. Once again, You’ll end up with 3 wraps - but leave bight longer than you did with the single column.
This time, when you pull the bight over the wraps, go over the ropes below as well. This way you’re creating a lock with the rope between the ankles.
Tie a simple overhand knot, with the bight wrapping over the tail, and pull horizontally to tighten. Next do a square knot by passing the bight under the tail, then over the tail, and through the little loop that you created.
Once again, tighten horizontally the secure the tie.
The somerville bowline is the rockstar knot that NEVER slips.This is also a single column, and begins similarly, but unlike the square knot, this one is non-collapsible.
Once again, you’ll fold your rope in half to find the middle of the rope, or the “bight”.
Begin by holding rope from the bight and wrap twice around the wrists, and make sure they are facing each other to protect the inner wrist, and that you start below the wrist bone. You’ll end up with 3 wraps - bight, middle, tail. The tail in this instance is the rest of the rope. Make sure all 3 wraps are straight and not overlapping.
Form a loop around the bight with the tail, making sure the running end of the tail is facing the wrists. Here, you want to make sure your desired tension is set, because you won’t be able to correct this one once you tie the knot.
Pull the bight through the loop you created and over the tail.
Then, pull the bight under all the wraps and back up through the loop.
Hold the bight - but don’t pull. Then only pull the tail to tighten down the knot. Hold the knot and pull vertically from both directions to secure the knot.
Because this knot is super secure, you can explore all your rope play fantasies without unraveling.
The single column tie with a square knot is a great place to start if you’re new to ropes. It’s easy to tie and helps set your desired tension. Keep in mind though, that this knot leaves room to move, so it has potential to slip, but it’s great if you want to do a quick tie.
Before you start, fold the rope to find the Bight, which is the center of the rope. You’ll always do this when you start your tie in order to keep your ends even.
Begin by holding rope from the bight and wrap twice around the wrists, and make sure the wrists are facing each other to protect the inner wrist, and start below the wrist bone. You’ll end up with 3 wraps - bight, middle, tail. The tail in this instance is the rest of the rope. Make sure all 3 wraps are straight and not overlapping.
Pull the bight over the tail and under all the wraps.
Pass the bight under the tail, then over the tail and through the little loop that you created.
Pull the tail and bight in opposite directions horizontally to secure the knot. You’ll know you did it right because the rope ends will flip. Make sure to really lock down this knot - it can come undone if you do not properly tighten it.
So I do have a little wiggle room in this tie, and if I tried hard enough, i’d probably be able to escape. [closing sentence]
If you’re partner is a little nervous about “too tight” ropes this knot is perfect for your play. You’ll feel the tension of the rope but you’ll still be able to move around.